|
|
#1
|
||||
|
||||
![]()
what size pinions do i need for a b4 indoors with a novak gtb with novak 6.5motor and lipo?
spur is an 84 i believe. also gearing for an 81 just incase. cheers dave |
#2
|
|||
|
|||
![]()
ran a 7.5s on LiPo @ York on 24/81
same pinion for 84 won't be that far away. for 6.5 go to 23/81 / 84 81 is kit spur |
#3
|
|||
|
|||
![]()
I run a 23 on a kit spur with a 6.5L EVERYWHERE (on the B4 and now S2).
The 6.5L is just such a versitile motor ![]()
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups ![]() |
#4
|
||||
|
||||
![]()
What goes for a Losi xelronin 6.5 sintred? I use 21/84 now but can i go 22-23/84?
|
#5
|
|||
|
|||
![]()
How hot id your motor after 5 minutes?
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups ![]() |
#6
|
||||
|
||||
![]()
Quite hot acctually. Thats why I´m asking because it woulnt be any cooler with higher gearing. Do you guys all run lipos? I am not so far but thinking about it since its being aproved by efra. I have heard that lipos makes both motor and speedo run cooler than with subC´s.
|
![]() |
Thread Tools | |
Display Modes | |
|
|