|
|
#1
|
||||
|
||||
![]()
Hi Guys, this will be a hot topic as Li po are now more common place, been covered in another thread but thought id start a official one.
DaveG28 has used BX battery posts to get li po in his B max, any part numbers/pics would be great... I have ordered Pred X11 battery posts/straps to try in my B max, i thought the thin carbon strap will give you good access to the battery connectors. Feel free to post pics etc of what you have used to get li po saddles into the B max..... |
#2
|
||||
|
||||
![]()
Well first you need some legal saddles don't you?
![]() G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#3
|
||||
|
||||
![]()
Iv edited my post now ref Lipo saddle legallity! dont want to start a massive debate again! I have not read all the post yet on the subject! cheers for the heads up Northy!
|
#4
|
||||
|
||||
![]()
Don't stir Northy!
The posts are BX118M, not sure about straps as I had spares. Not sure it matters but I also dremelled the holes larger on the carbon straps and filed down one end too, this was so they don't tension the posts and still leave the rear bulkhead room to flex, I wanted it to replicate the base kit as much as possible! Will try some pics later! Sadly, Northy is right though! |
#5
|
||||
|
||||
![]()
Thanks for the part numbers DaveG28, yes pics will be nice!
Id like to keep it all Yokomo but giving the pred ones a go anyway! Yes I know Northy is right! |
#6
|
||||
|
||||
![]()
The straps are BX118, just checked!
|
#7
|
||||
|
||||
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|