Can I use DEX set up with DEST?

[Boons]

Hi all,

I got some good set up advice for the buggy and I'm thinking I could start with that on a truck as a starter?

It's for carpet

Cheers!

[Slider SCT]

I would of thought you could use a desc setup as a base to work from I think I remember seeing a few desc carpet setups on the team durango & petiterc web sites mate

[mrspeedy]

I don't see why not .. we used the std Craig Collinson buggy setup on our trucks but with 5wt heavier oil and worked a treat ... been running the same setup for about a year now

[Boons]

Originally Posted by mrspeedy

I don't see why not .. we used the std Craig Collinson buggy setup on our trucks but with 5wt heavier oil and worked a treat ... been running the same setup for about a year now

Cool.

I was told to run dark red springs up front with 450 oil and black rear with 350 oil.

Sound ok?

[Origineelreclamebord]

Originally Posted by Boons

Cool.

I was told to run dark red springs up front with 450 oil and black rear with 350 oil.

Sound ok?

That's what I run on my DEX210 for dry astro and carpet (though I do use 4-hole pistons up front, 5-hole in the rear) - anyway, it should be a good start

[Boons]

Cool thanks mate.

My truck built as per instructions has quite a bit of toe out on the front, toe in in the back with quite a lot of camber.

Is this what trucks like?

I was thinking of reducing it all a bit especially the front toe out.

It's raced on indoor astro.

Cheers!