|
|
#1
|
||||
|
||||
![]()
Got a Lipo balance charger coming that doesn't come with the balance lead itself, where can you buy them from? It's for the SMC style of Lipo packs http://www.smc-racing.com/lightning_volts.html not the Trakpower style.
Cheers. Dan
__________________
Nortech is ACE! |
#2
|
||||
|
||||
![]()
Packs list TP style connector = Thunder Power
you have to match that to your charger/balancer socket which may be Align, Hyperion or Astro, FMA or Thunder Power if you are lucky. plugs/sockets may have other names which is helpful ![]() selection here: http://www.fast-lad.co.uk/store/inde...page=3&sort=1a Here they like to call them taps: http://www.rclipos.com/Accessories.htm has good visuals & descriptions, should be able to glean something from these, which charger/balancer will you be using. |
#3
|
||||
|
||||
![]()
looks like same as the corerc balance tabs.
|
#4
|
||||
|
||||
![]()
trakpower do a full range a call to them with your charger make/model and cells will result in a part number
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#5
|
||||
|
||||
![]()
Thanks chaps, charger arrived last night but no cells yet. If I'm lucky the port on the charger will match the lead on the cells and all is well. If not I'll do one of the above!
Its a B6 charger by the way. Mark - The products page on the Trakpower site doesn't work for me on either work or home computer, and hasn't worked for a few weeks. Is it just me or is it down? Other pages on site seem to work.
__________________
Nortech is ACE! |
#6
|
||||
|
||||
![]()
dont think you can go direct to the port, mine has various adpters trakpower sent me, can check which one fits at york week sunday if any good, if not email [email protected] he will tell you which one you need
site works ok for me www.trakpower.co.uk
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#7
|
||||
|
||||
![]()
My BC6 has a single Align socket, but cannot plug 2S connector directly in, needs a cable/adapter lead, our B6 (and there is a few with this number) has a range of Align sockets, so 2S battery can connect directly (if same plug).
I am thinking you will need an Align male (depending on charger) to TP female. I would suggest changing the battery balance connector - but plugs to fit yourself are difficult to find, but should be as simple as an receiver plug. EDIT something like: http://www.aeroshack.co.uk/shop/gbu0...am_eac129.html or http://www.aeroshack.co.uk/shop/gbu0.../JSTXH_FP.html or http://www.gobrushless.co.uk/Battery-Leads.htm the one awaiting picture ! or http://www.maxamps.com/categories.php?cat=173 Useful: http://www.modelflying.co.uk/news/article/mps/uan/459 |
![]() |
Thread Tools | |
Display Modes | |
|
|