|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
26-10-2008
|
||||
|
||||
Atomic Carbon S4 +
Hiya all,
I've got forsale a project that i havnt got time to finish. It's my LiPo adapted Atomic Carbon S4. It has the Team Associated B44 Slipper fitted along with the B44 centre drive CVD's that have only been run at one meeting when i had the car on the track with Nimh cell's in it set out 3x3 testing it. It will fit the Trackpower 3200's in as i have checked out the dimention's given on there site and checked back over the car with a set of precision calliper's. Its got Lungsford Turnbuckles all-round with orange RPM cups. Unfurtunalty i havnt got a spare Atomic Carbon front shock tower but i have fitted a BJ4WE front tower. Im also including a rear BJ4WE tower and an Atomic Carbon rear tower which is fitted to the car. Ive had to buy some Brand new slipper hubs too which have been run once they cost me £16 which have had like i say one run along with some almost new slipper pads. Ive fitted Brand New shiney CVD'S to the front of the car too plus it comes with Jamison-ized© silver thumb screw's!  It come's with a number of bodyshell's one of which has been painted by John Miller. The name basically speak's for its self - Works of art. The shell is in great condition and the picture doesnt do it any justice! To complete the Car you need the following to get it on track: 4x Wheel nuts 2 x Sleeve's for the front bulkhead 2 x Front King pins Shocks all round (Including the fitments/bushings ect) 2 x BJ4WE cell strap's 1 x BJ4WE arm 1 x Bumper Oboviously the above won't cost a forune. Maybe Phil C can help you out if he has any of these bits forsale if so hes the man you need to speak to! Im also including one of the Plasitc centre bulkhead mounts too with this. It has the BJ4WE centre mounts at the moment that have been modified to fit the Plastic bearing holders. Also the top peice that stops it all coming out of the top has been modifeid too but could do with a good look at, Ideally it will need the B44 centre mounts but as it is now it does work. Im looking for offers on this, It doesnt much at all to have it out on the track  Garry
__________________
 |
|
#2
27-10-2008
|
||||
|
||||
|
PM replied to
__________________
|
|
#3
27-10-2008
|
||||
|
||||
|
Sold Pending Payment.
__________________
|
|
#4
27-10-2008
|
||||
|
||||
|
Sold.
__________________
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
