KF Ball Diff

[Losi_110]

Just had a bonus find in my box of bits, cane across the diff out my old mi2-ec which turns out to be a perfect fit in the KF.

[shaungooner]

SX3 diff works too, been using one for the past few months to great effect

[The Dark Knight]

I have been thinking about trying a ball diff in my KF, does it offer much advantage over a gear diff? I like the ease of maintenance on a gear diff.

[MattW]

The only issue with the Mi2 EC diff is that it will have alloy outdrives. I'd expect it to last at least a few laps in a KF before the driveshaft wedges itself through the coating!

[Losi_110]

Originally Posted by shaungooner

SX3 diff works too, been using one for the past few months to great effect

do the SX3 diffs have the right offset on them or does it leave the belt at an angle?

Originally Posted by MattW

The only issue with the Mi2 EC diff is that it will have alloy outdrives. I'd expect it to last at least a few laps in a KF before the driveshaft wedges itself through the coating!

Yea your'e probably right but they're sitting in my box not doing a lot so I'm going to give it a race or 2 with it to see how I get on and then look into getting something a bit more permanent rather than splashing out on something that turns out not to suit

[bobbin]

the SX3 diff cups are the same as the kf/k1 but you need to use the kf/k1 diff pulley to get the correct offset for the belt