|
|
#1
|
||||
|
||||
![]()
Hi guys,
This weekend I have my first race with the bj4 ride and I haven´t got the chance to run the car yet. I´m trimming the steering in the first qualifying run ![]() ![]() I´m running GTB 6,5 4200 lipos with some added weight (total 330gr) Thanks a lot. |
#2
|
|||
|
|||
![]()
Is it a worlds edition or the original stick pack car?
(Track looks dialled!) |
#3
|
||||
|
||||
![]()
Sorry is the worlds one
![]() |
#4
|
|||
|
|||
![]()
Try starting off with the lipo setup I was running at worksop...
http://www.oople.com/forums/showpost...2&postcount=82 Except green springs on the back and leave the extra ballast weight out, the car is much better with the CG moved forward ![]() What will you be using for tyres? |
#5
|
||||
|
||||
![]()
Thanks, yesteday night I was cheking out this setup sheet. So I´ll put out the weight and change the green springs for black ones.
Now I just have holeshot for the front end and for the rear mini pin, bigshot and ifmar stud. Another thing concern me, I see your using 22t pinion with the 6,5 when a 16t in sugested (i´ve already installed) |
#6
|
||||
|
||||
![]()
Well, I´ve had plenty of lil troubles due to the lack of prep. The car was spining out like crazy. After changing almost everything I realized one cvd pin was touching the rear a-arm
![]() The setup was real weird at last, blues at the front and blacks at the rear end. Hole shots fwd and big shots backwards. But wasn´t real confortable in the whole race. My last race was 3 years ago and I´ve held a transmiter since then a couple of times so my goal was just to have some fun and chat with old friend. Maybe I chatted way to much, even I rode a chopper like car when forgot to set the ride height after changing the front springs ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|