dex410v4 options help.

[Bayareabasher]

So im going to take my sweet time on this project and wanted to know my options. So 1st off Does anyone know if the jconcepts rulux will fit the dex410v4? For motor/esc im going for speed passion reventon pro 1.1 v3 with 3.0 7.5r motor is this any good for jumps on the ramp? And lastly what are some good batteries?

[Bayareabasher]

Yay it came in today!! Time to get started. I cant seem to post pics.

[mattr]

I've got the Rev Pro V1.1 and a thunderpower 8.5t motor, with a bit of boost and turbo, its mental quick. Will keep up with just about anything else on the track.
And for batteries, either gens ace or hobbyking nanotechs, both reasonably priced and reasonable/good performance

Not sure what you mean by "jumps on the ramp"?

[mattr]

And you need 14mm hex wheels, so i don't think rulux will fit.

[JohnM]

You could fit Rulux wheels on it if you get a set of the smaller hexes for the front, I guess TD still sell them and it's pretty easy to convert the rear to pin drive, the V3 came with the gold cone spacers to do that, not sure if it's still in the V4 box.

Thing is, the Rulux wheels are a different offset on the front & make the car drive odd compared to std offset wheels, but then if they were the only wheels you used, you'd never know the difference.

[Bayareabasher]

Sweet thanks for the help guys! i guess rulux is a no go. And also what pinions should i start with? And i meant jumps on the track i edited it but didnt go thru i guess. And can someone enlighten me on boost/ turbo?