Capacitor, power caps and Shottky diods?

[Spihc]

Hi folks,

I'm using a GM v12xc esc, and has a couple of questions.

1. The Shottky diod, should it be placed on the +/- poles on the ESC, or directly on the motor? Why is one way better then the other?

2. Using a rather old motor, wich i'm 99% shure that dont have any capasitors, are they placed on the motor? If shottky is placed on motor, they wont fit!?

3. Power Caps, what are they, where do they go, what do they do and why!?

Any help is appreciated, have only been using mild motors (19-27t) and reversable esc's before, so Im 100% green on this.

Regards

Tobias

[sosidge]

Originally Posted by Spihc

Hi folks,

I'm using a GM v12xc esc, and has a couple of questions.

1. The Shottky diod, should it be placed on the +/- poles on the ESC, or directly on the motor? Why is one way better then the other?

Doesn't really matter. Supposedly on the motor is ever so slightly more effective.

2. Using a rather old motor, wich i'm 99% shure that dont have any capasitors, are they placed on the motor? If shottky is placed on motor, they wont fit!?

Should do. Just solder them on the same contacts.

3. Power Caps, what are they, where do they go, what do they do and why!?

They smooth the supply from the battery. Go across the battery +/- connections. The V12 should have one fitted.

[Spihc]

Sosidge,

On my ESC I have a Schottky diod (that's at least what it looks like to me), not a power capacitor from the looks by it (remember, new to this), going from motor + to -.

When you say "The V12 should have one fitted", do you meen, "It does have one built in", "you should ivest in one ASAP" or "you can if you want to".

[sosidge]

Originally Posted by Spihc

Sosidge,

On my ESC I have a Schottky diod (that's at least what it looks like to me), not a power capacitor from the looks by it (remember, new to this), going from motor + to -.

When you say "The V12 should have one fitted", do you meen, "It does have one built in", "you should ivest in one ASAP" or "you can if you want to".

I mean "it should have one supplied in the box for you to fit". It should always be run with one.

[Spihc]

It was sold to me as used, so no box, no manual etc.

I did now check that the schottky was connected to + (wich is used by booth battery and motor), and - battery.

Should it be this way? I thought it should be +/- for motor, not battery.

Feeling confused here.

[JCJC]

http://www.teamnovak.com/Tech_info/h...tky/index.html


from... http://www.teamnovak.com/tech_info/how_to/index.html


and found this: http://www.gm-racing.de/rwdownload/i...p?url=&dlid=22

some pages in english