|
|
#1
|
|||
|
|||
![]()
I ran my 22-4 for first time today. I had NO power. Belts seem to me to be fine, I swapped motors to check if it's that, adjusted slipper, changed pinion but not helped at all, great through the corners but screwed on the straights. Any ideas?
__________________
Dirty Dear |
#2
|
||||
|
||||
![]()
Have you checked your speedo settings?
__________________
Xray, Orca, 1UP Racing, Avid, X Factory UK, RC Disco, Hudy, RichPaint, RDT products, Screwz4rc http://www.screwz4rc.co.uk My Trader Feedback - http://www.oople.com/forums/showthre...hlight=tyreman
|
#3
|
||||
|
||||
![]()
the gearing the manual states is a little out for our tracks, from memory i geared mine down a tooth or 2 from what it says and it was loads better.
__________________
Mike Baldwin - Caldicot |
#4
|
|||
|
|||
![]()
Is your sensor lead broken? Boost and turbo will not work if the esc can't adjust the timing.
|
#5
|
|||
|
|||
![]()
Speedo and sensor lead all okay. Came out of my Vega and checked back to see its not causing issue. I tried going up 2 pinion teeth to get more top end but. Same sluggish result.
__________________
Dirty Dear |
#6
|
||||
|
||||
![]()
We need to know a bit more to help out, like speedo & motor, make, gearing and speedo settings.
__________________
Xray, Orca, 1UP Racing, Avid, X Factory UK, RC Disco, Hudy, RichPaint, RDT products, Screwz4rc http://www.screwz4rc.co.uk My Trader Feedback - http://www.oople.com/forums/showthre...hlight=tyreman
|
![]() |
Thread Tools | |
Display Modes | |
|
|