Go Back   oOple.com Forums > General > 12th & 10th On Road

Reply
 
Thread Tools Display Modes
  #1  
Old 20-02-2014
Charger's Avatar
Charger Charger is offline
Member
 
Join Date: Aug 2013
Posts: 37
Default Yokomo BD7 ver RS- a good deal?

Hi everyone, I'm thinking of getting into touring car racing and I was wondering if the titled Yokomo car is a good car to start with.
I'm really not into the entry level or beginer style cars like some low end Tamiya cars for TC racing so that's why I think the Yokomo car is a much better deal for what you get, considering it comes with the same chassis as the pro spec Yokomo BD7 and can be fully upgraded with all the BD7's parts.
I'm wondering if it's a good car for the money so any feedback would me much appreciated.
Reply With Quote
  #2  
Old 20-02-2014
beale's Avatar
beale beale is offline
Senior Member
 
Join Date: Apr 2011
Posts: 371
Default

Second hand Xray. TRF Yokomo will be better value in the long run.
Believe me go to your local track and get a popular 1
Reply With Quote
  #3  
Old 20-02-2014
dale's Avatar
dale dale is offline
Senior Member
 
Join Date: Mar 2010
Posts: 523
Default

I generally advise staying away from the stripped down kits like that. You could get a second hand top spec car for the same money, which will be more competitive in the short term and cheaper in the long run.

Xray are usually the best bet second hand. They're made so well to start with that even after a couple of seasons use they're still in great shape.
__________________
RC-Timing
Mercedes AMG F1
Team Xray
Reply With Quote
  #4  
Old 20-02-2014
PurcyP PurcyP is offline
Member
 
Join Date: Apr 2013
Posts: 77
Default

I ran the BD7 RS for quite a while and to be honest i wouldnt recommend it. For 17.5t blinky i suspect out of the box it will be fine but as soon as boost is applied it starts to destroy itself.

To get the car to handle i had to spend another £100+ on top, for full fat BD7 roll bars front n rear, all the drive train components, springs etc etc, when it comes down to it, not worth it to be honest, especially in boosted.

for blinky as said, might be fine, boosted..no expect to spend money straight away.

That being said when it was setup and we found its sweet spot it was a wolf in sheeps clothing, very capable but at the same time it was costing me near the same as a full fat BD7 so have a think about that.
Reply With Quote
  #5  
Old 20-02-2014
Charger's Avatar
Charger Charger is offline
Member
 
Join Date: Aug 2013
Posts: 37
Default

Quote:
Originally Posted by PurcyP View Post
I ran the BD7 RS for quite a while and to be honest i wouldnt recommend it. For 17.5t blinky i suspect out of the box it will be fine but as soon as boost is applied it starts to destroy itself.

To get the car to handle i had to spend another £100+ on top, for full fat BD7 roll bars front n rear, all the drive train components, springs etc etc, when it comes down to it, not worth it to be honest, especially in boosted.

for blinky as said, might be fine, boosted..no expect to spend money straight away.

That being said when it was setup and we found its sweet spot it was a wolf in sheeps clothing, very capable but at the same time it was costing me near the same as a full fat BD7 so have a think about that.
Hi there, I don't like the sound of that at all! I was planning to run it probably in open mod as well! It would be in complete bits!
Reply With Quote
  #6  
Old 21-02-2014
beale's Avatar
beale beale is offline
Senior Member
 
Join Date: Apr 2011
Posts: 371
Default

I have bought a second hand Xray T2 009 and T3 12 with indoor use only and they looked like new. They are still running original wishbones hubs ect with the exception of the front right steering knuckle on both cars all my fault.
You should be ably to pick up a T4 or even T4 14 in like new condition.
The other to look at as good new value is the DETC410 not sure of release date yet but it is all the best bits of a TRF417, T4, ARC R10 and BD7 on 1 chassis for about £320
Reply With Quote
  #7  
Old 21-02-2014
dale's Avatar
dale dale is offline
Senior Member
 
Join Date: Mar 2010
Posts: 523
Default

Quote:
Originally Posted by Charger View Post
Hi there, I don't like the sound of that at all! I was planning to run it probably in open mod as well! It would be in complete bits!
To be honest I wouldn't recommend running open mod to anyone new to TC, the speeds and acceleration are totally insane. It's nothing like running mod in a buggy (which I've done). I consider myself a decent driver, with 20 years experience (17 years in TC), and I still wouldn't touch an open mod TC these days!

13.5 boosted is enough for most of us, as these will be doing over 50mph at the end of the straight and will get there in a couple of seconds.

But if you do go that way, you want something bloody strong, so an Xray is really the best option. Definitely stay away from the budget/Chinese kits for mod.
__________________
RC-Timing
Mercedes AMG F1
Team Xray
Reply With Quote
  #8  
Old 20-02-2014
Charger's Avatar
Charger Charger is offline
Member
 
Join Date: Aug 2013
Posts: 37
Default

Quote:
Originally Posted by dale View Post
I generally advise staying away from the stripped down kits like that. You could get a second hand top spec car for the same money, which will be more competitive in the short term and cheaper in the long run.

Xray are usually the best bet second hand. They're made so well to start with that even after a couple of seasons use they're still in great shape.
Hi there, the xray does look quite good but I was more wanting to get a brand new kit. The xray is defiantly an option though. Would any top spec used car be half decent or is there any in particle that I should stay well away from?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com