x6 to x6 cube,

[Critch]

I currently run b4.1 with a load of spare parts.

I also have a x6, not sure if it's the 3 or 4, gear.
Plus another one which is for spare parts on.

Would I just need part no XFK031, to convert to a cubed, or is it not that simple..

Thanks

[YoungChazz]

It all depends on whether your original X - 6 was updated to 4-Gear. If so, the K 031 will have almost all of what you need, and you'll wind up with a spare nose piece, which is good. If my original X - 6 were 3-gear, I'd probably get the K 030 and convert my B4.

[grimidol]

+1 if you get the upgrade then you have alot of spares ;-)

[Critch]

Was trying not to use the B4, if I could help it,

Any idea's is this the 3 or4 gear

[JohnM]

Looks like it's the 4 gear box, which side of the car is the spur gear on?

[Critch]

Originally Posted by JohnM

Looks like it's the 4 gear box, which side of the car is the spur gear on?

Is that the really big cog ?? That the motor cog turns ?