|
|
#1
|
||||
|
||||
![]()
Just checking my speedo is ok i run it for a minute and the orange light is on and the red is flashing
Is this right?
__________________
Iain Schumacher Laydown Schumacher Cat L1 Schumacher RC Octane |
#2
|
|||
|
|||
![]()
Red light flashing indicates low battery.
|
#3
|
||||
|
||||
![]()
I have already checked that and my battery is reading 8.2v on the program box
__________________
Iain Schumacher Laydown Schumacher Cat L1 Schumacher RC Octane |
#4
|
|||
|
|||
![]()
Which speed passion?
The reventons have very sensitive thermal and lvc settings. (Actually, they're just a bit crap) |
#5
|
||||
|
||||
![]()
Speed Passion Reventon Pro
__________________
Iain Schumacher Laydown Schumacher Cat L1 Schumacher RC Octane |
#6
|
|||
|
|||
![]()
Try newer firmware, some of them fix the lvc issue.
Or run with it switched off, but only run for x minutes at a time. X is dependant on motor turns, car type, battery capacity etc. I do 10 minutes, with a boosted 8.5 in a 410. Drop to 8 minutes with the 6.5 (outdoors). I tried a few of the firmware versions, they all triggered lvc too early! (The thermal protection is also very aggressive! ) |
![]() |
Thread Tools | |
Display Modes | |
|
|