sv2 diff action

[keenbutkrap]

this could be a well answered topic but new to me i have just got a second hand sv2 and setting the diff is a nightmare the diff works smoothly but the setting is either slipping or almost locked there seems to be no in between would i be better fitting a gear diff

[mark christopher]

Gear diff will not fit.
Your sure you are undoing the lock screw in the diff before you adjust it?

[johnboy]

Have you done a rebuild on the diff? See what the coned washers are like they might need replacing.

[keenbutkrap]

ordered a full rebuild kit could be anything but in my opinion it seems that the diff washers seem to be binding on the diff gear not the balls could be wrong but if all the parts are replaced it should cure it

[Jsmith]

I have a diff thats only done 1 run if you want it. I paid £36.00 for it assembled from JE Models.

You can have it for £30 posted if you want.

Jack

[andy-aj]

I might be wrong, but I think the diff gear can only go one way round. Have you got it the correct way?