S2 build questions

[DaveG28]

Hey all,

Couple of quick questions on the S2 in case I need to order some stuff before finishing the build!

Servo Mounting: Do the B4 ones work for fitting the servo to the car?

Shocks: Planning to run Losi shocks, on the front I am using the Atomic shock tower, as far as I can see on the top of the shocks I need to use the nuts as per the instructins, then the thicker Losi top bushing, to make sure the shock clears the tower, does this sound sensible? Are people using the associated stuff on the bottom of the shck shaft to make sure it fits in the arms well?

Thanks guys, oh and love this kit!!

Dave

[matdodd]

Ye B4 servo mounts are what most people run & you can run the losi shocks like you say.
O & Losi shock bottoms are fine to

[DaveG28]

next question!

When putting spacers between the gearbox and motor mount plate (on the 2 screws), are you mean't to use 5mm of spacers, 3mm, or 2mm?

Also, do you not grease the idler gears etc, neither b4 instructions or s online guide show it?? If greased, wha grease is good to use?

[bert digler]

Originally Posted by DaveG28

next question!

When putting spacers between the gearbox and motor mount plate (on the 2 screws), are you mean't to use 5mm of spacers, 3mm, or 2mm?

Also, do you not grease the idler gears etc, neither b4 instructions or s online guide show it?? If greased, wha grease is good to use?

spend plenty of time building the gearbox a very small amount of grease can be used, i used black grease also the spacers i used are bj4 spacers that fit the top deck to the gearbox

[DaveG28]

Cheers mate, and apologies for my spelling!

[bert digler]

Originally Posted by DaveG28

Cheers mate, and apologies for my spelling!

my spellings shite dont worry about it which version is it