|
|
#1
|
||||
|
||||
![]()
I have been running a 44.1 but upgraded this week to a 44.2. all is well except the car is nose diving badly. when bought this car had no spine weights so as my 44.1 I added 85 on the rear spine between batteries. still no luck so I added some brass under the batteries. still no luck. gave the car to another 2 respected drivers and the same. total control and planted but nose dives. might I say not a large jump.
taken slow =dive fast with a blip in air =same all micros when untouched by the jump and other style cars where all ok. the jump was shaped like a quarter pipe. ![]()
__________________
Current rides N slides and flies sponsored by http://www.westernvalleymodels.co.uk/
|
#2
|
||||
|
||||
![]()
What's the set-up you're running?
MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#3
|
||||
|
||||
![]()
Drag brake on the ESC?
__________________
Vega RB6 - Orion - Apex Models - JE Models - Cable ties
|
#4
|
|||
|
|||
![]()
Is the drive train free?
How much drag brake ? Does it coast ok without stopping too quickly? So you've tried the blipping in the air to bring the front up?? Gaz
__________________
Gareth Hill Schumacher - Sanwa - LRP - Mb models |
#5
|
||||
|
||||
![]() Quote:
Something must be dramatically slowing the rotation of the wheels. If you maintain rpm off the jump and while in the air it should stay flat. Id look at the drivetrain, maybe there is some binding. Id also say dont let off the throttle when you hit jump, but im sure you knew that anyway. |
#6
|
||||
|
||||
![]()
rear
-2 camber ,3rd hole out on hub. inside on arm, middle on tower. using 10mm shocks with No3 piston 35 weight oil, green spring.2 spacer on anti squat... no spacer on camber top deck front outside on arm, middle on tower, silver spring,40 weight oil,-1 camber,2 spacers under camber arm on top deck running 20/81 with new mini pin yellow . the only thing that I would consider wrong is the wing is cut down to first bend?????
__________________
Current rides N slides and flies sponsored by http://www.westernvalleymodels.co.uk/
|
#7
|
||||
|
||||
![]()
ESC??..
__________________
Vega RB6 - Orion - Apex Models - JE Models - Cable ties
|
#8
|
||||
|
||||
![]()
yes I have checked the drive train. no binding and I don't run any drag brake but that's what it feels like is on.and the other drivers stated that's what it like. basically the set up is the same as my 44.1 and was ok with that . it feels like it being kicked up the bum off the jump.
__________________
Current rides N slides and flies sponsored by http://www.westernvalleymodels.co.uk/
|
#9
|
||||
|
||||
![]()
running a sp 10.5 motor matched combo.think lpf silver gt pro v2.0
__________________
Current rides N slides and flies sponsored by http://www.westernvalleymodels.co.uk/
|
#10
|
||||
|
||||
![]()
also silver roll bar front and rear.
__________________
Current rides N slides and flies sponsored by http://www.westernvalleymodels.co.uk/
|
#11
|
||||
|
||||
![]() Quote:
__________________
Vega RB6 - Orion - Apex Models - JE Models - Cable ties
|
![]() |
Thread Tools | |
Display Modes | |
|
|