Gr300 dsm2 ground binding problems

[tumpier]

Recently purchased the above but can not get them to bind,when powered up the rx flashes quickly,then press bind flashes for a few seconds then goes out, STUCK help

[fidspeed]

stupid question what tx are you using ? i have had issues with HK flying rxs sometimes takes a while when light stops flasing on rx and then goes out for a while before it comes back on solid

fid

[tumpier]

The radio is a dx3s,got two orange rx's and can not get either to bind

[fidspeed]

are u powering rx thru bec in esc while binding or 4.8 v nicad ppack

i had a problem racing today with a core/pulse which wouldnt bind using a rx pack needed more voltage through BEC ?

seems more like there faulty in all honesty

[tumpier]

Using power through esc.,.,., seems funny for 2 not to work

[fidspeed]

just re read thread

im sure you have bind plug in ?

you talk about "press" i can see no button on RX in pics /

sorry asking stoopid questions just trying to shed light on it

[tumpier]

Sorry if I'm vague yep bind plug is in,light flashes you press bind on rx the it flashes for a bit then goes out,have just read the they are not compatabile with early radios not sure if this is the problem

[The Dude]

If your DX3S is indeed a DSM2 tx (orange sticker on the back side), bind the receiver with a rx battery plugged in the receiver.

[fidspeed]

i must admit i thought DX3R/S/C series was DSM2 i use spekky modules in my ko radios i know there only DSM not DSM2

be worthwhile checking