Sanwa Exzes X - How do I get 50/50 throttle

[dale]

Just switched to a Sanwa Exzes X. Seems like a great radio so far, lots of nice features and great quality.

Not sure I like the 60/40 throttle position though, as I've used 50/50 for the past 20 years on Futaba radios.

How do I change it to 50/50? I had a look at taking the radio apart but even with the case screws removed it seemed reluctant to come apart.

[john333]

simple answer is I don't believe you can. I've got one, and I've just also looked through the instruction book and it isn't mentioned anywhere.

[h0m3sy]

I think it's explained on page 23 of the manual, throttle point setting. See the link below...

http://media.globalhobby.com/manual/751585.PDF

[john333]

don't think thats it. He wants the throttle stick to be in the centre so there's the same movement forward and back.

My old 3VC used to have a ratchet system to move the whole stick backwards and forwards, the Exzes doen't have this function

[MattW]

Dale, I presume you're talking "mechanically" 50/50??

Officially, it's not possible!! However, like everything else I guess it depends how much you're prepared to do. I think you're looking at some fairly "involved" mechanical mods that I think the vast majority of people ought to keep as far away from as possible - especially as John won't want a load of them being sent back!!

It is relatively easy to get the radio apart - so if you're struggling, then I would guess you've not got all the screws out. I honestly can't remember where they all are, but I have had my radio apart and it's relatively easy.

I'm sure I've seen it posted online somewhere how to make this change - something tells me that I saw it on Tony Evdoka's site, but I could be completely wrong on that - so appologies to Tony if I am! Or it could be that the mod I saw was to make the spring tension even rather than the actual travel even.

[john333]

it certainly wouldn't be a mod for the faint hearted!

[tyreman]

It's a simple change you just need to move a pin on the throttle stick, I'll do it for you on Sunday Dale it takes about 5 minutes to do.

[dale]

Originally Posted by tyreman

It's a simple change you just need to move a pin on the throttle stick, I'll do it for you on Sunday Dale it takes about 5 minutes to do.

Cheers Brian, can't make it this weekend though unfortunately.

The main issue is getting the case apart, do you have to do anything with the switch panels on the top of the case? They seem to be glued across the case join and I didn't want to force them off.