Schumacher Block Rear Tyre Mounting

[Cremegg]

Hi all

Could some please clarify how these fit onto the rim properly

I know a few guys at SRCC run these and I can't find any other info about them

On a standard 2.2 size wheel them seem to stretch on the wheel?

Is this right? Or are they for a different size

Thanks

[i4n]

I think they're a 2" not a 2.2" tyre which is why they're tight and you have to stretch them over the rim.

I had a set on my SX3 all summer with no problems. I just put a normal schumi medium insert in them and stretched them over the SX3 wheels and glued them on.

[cr1tch]

Do you have to cut off the ribs in the centre of the wheel

[i4n]

Originally Posted by cr1tch

Do you have to cut off the ribs in the centre of the wheel

I didn't

[Jamie B4]

I did have to cut the rim off for the kyosho or rather Mr Parr and Evison did.

[tony12795]

You can mount them as a normal tyre... But we found that they generated to much grip and they don't fit in the brca box, so thanks to Si we mounted them so the tyre is just over the rim and the tyre is about 5mm narrower. Doing this seems to tack away forward traction and give more side bit..

On the kyosho wheels we had to cut the two inner rimes off we just put the tyres on and glued em. Easy :-)