C4.2 build

[Brewskie]

just building the above an have come across a little problem, when i attatch the rear arms an lift them up towards the shock tower they wont go up very far as they seem to rub on the diff outdrives, ive checked everything to make sure its correct fitting wise but as always a second brain can catch something im missing

any help would be much appreciated guys

[MiCk B.]

Hi,

You might just need to remove the material on the arm where it hits the outdrive. Had to do the same on the C4.1

It's partly to do with running the arms reversed.

MiCk B. :-)

[K-Brewer]

Originally Posted by MiCk B.

Hi,

You might just need to remove the material on the arm where it hits the outdrive. Had to do the same on the C4.1

It's partly to do with running the arms reversed.

MiCk B. :-)

ive seen this done on one before where i race

[traffman]

Thats handy to know as i am just in the throes of building one.

[lloyd1]

Have you put your shocks on yet cos then your arms wont lift up as far i built mine and did not have to file out rear arms

[Skelbo]

I thought the same. I'm all now built except for the shocks and it didn't seem that the arms would lift so high once they are attached.

On a separate note, has anyone had a few incorrect or missing screws in the build process? I had a few small problems.