Shock sizes

[Southwell]

I have a set of XX4 shocks, what bits do i need to change? Just rear shafts and bodies?

Cheers

[Big E]

Yeah rear shafts and bodies.

0.9" bodies and either 0.9" or 1.0" shafts.

E

[Southwell]

Cheers Ellis, 0.9 or 1.0's then?
Any limiters or anything?

[YoungChazz]

Is this for the X - 5 or 6?

If X - 5, then the xx4 shocks are exactly what you need.

If X - 6, the xx4 front ones are correct, but you need buggy rears, as Ellis says.

[Big E]

2mm if you have the 0.9" or 3mm for the 1.0"

B spacer on the outside to limit the up travel.

[Lee]

Ellis, why limit up travel, or is it just there to stop the driveshafts hitting the diff on full compression?