Shock o-rings red and blue

[CARB]

Hi
My SV2 kit came with two sets of shock o-rings Blue and Red with a note to say that the the red give a better seal but a little bit tighter on the shaft as opposed to the Blue o-rings.

As a solution I used one Blue and one Red o-ring, putting the Red in first then the spacer and then the blue follows by the screw cap.

This seems to give a smooth motion and no witness of oil after a days practice.

CARB

[Juicy74]

I used all blues and the shocks leaked like a tap even with slime. I'm now on AE orings n good so far.

[mikeyscott]

Originally Posted by Juicy74

I used all blues and the shocks leaked like a tap even with slime. I'm now on AE orings n good so far.

Do you have a part number? Failing that I'll try nortech whites

[Spu83]

Originally Posted by mikeyscott

Do you have a part number? Failing that I'll try nortech whites

http://www.amainhobbies.com/product_...ild-Red-O-Ring

[dMITIj]

Sorry, didtent see it were on the Schumacher department :/

you can use thees i did for my DEX410v3:
http://www.rccarshop.co.uk/index.php...ng-red-10.html i did use them and no signs of oil leak anywhere i also use greenslime all the time.

[Conrad]

I use the 1/8 orange ones Schumacher sell, soaked them overnight in oil before assembly and they have been great since, not even a little sweat of oil.