|
|
#1
|
||||
|
||||
![]()
as it say i need a starting setup for stotfold please for a b4 an a b44, i like my cars calm not on the edge please
|
#2
|
||||
|
||||
![]()
bump come on its this weekend i need something please
![]() |
#3
|
|||
|
|||
![]()
Not sure about the B44 but for the B4 i would start with
Front: 35wt Number 2 piston Blue Spring (maybe silver if using stagger ribs) Middle on tower inner on wishbone Rear: 30wt number 2 piston silver spring middle on tower inner on wishbone extra short wheel weight in normal places camber links as per the manual
__________________
Norfolk Buggy Club- Norfolk's 1/10th and 1/8th Premier Off Road Model Car Club in association with BRCA East of England 1/10 Off Road Regional Racing JemmettFox- Accountants and Business Advisors Click any of the above to head to the website! |
#4
|
||||
|
||||
![]()
thanks but weight where cos i dont normally run any weight in my cars??
|
#5
|
||||
|
||||
![]()
30g on there rear anti squat plate behind the gear box and 5 -10 each side of the chassis in the rear ^ sections is the norm
__________________
Team Associated- HobbyWing- Reedy- CML |
#6
|
||||
|
||||
![]()
do ppl run that for most tracks?? cos i never have an i strugle with the balance alot an cant jump the car most the time to nose happy
|
#7
|
|||
|
|||
![]()
I run 10 grams in each corner at the rear of the chassis, and then about 28 grams of lead between the rear hinge pin brace and the gear case.
__________________
Norfolk Buggy Club- Norfolk's 1/10th and 1/8th Premier Off Road Model Car Club in association with BRCA East of England 1/10 Off Road Regional Racing JemmettFox- Accountants and Business Advisors Click any of the above to head to the website! |
![]() |
Thread Tools | |
Display Modes | |
|
|