Burn out!!

[stoney69]

Hi Plugged in my bullet connectors into my 2 1s saddle lipos and turned on switch!
Then the red and black cable from the esc got that hot they caught fire and melted...

What could of caused this as i am new to buggy racing ?

The esc was red hot when i touched it
tryed to plug in again with another set of leads and within 1/2 second they were hot again so i unplugged them....

Please can anyone help


Thanks

Craig

[johnboy]

Sounds like connectors into the wrong terminals

[Cremegg]

Sounds like done reverse polarisation!

Looks like you've reversed the neg and pos wires around

You might have fried you esc too which can void warranty

What esc is it and does it still work?

[stoney69]

Hi
It's a hobby 120 amp and 5.5 motor in a losi 22 ltr
I checked the + and - when plugged into the lipos and they were right.
My son plugged the same leads in about a week ago and said he could see a bit of smoke so he unplugged them. I think he plugged them in the wrong way round, and it has done something at the time. It's ran ok once since then till tonight and puff.
Could he have damaged the esc ?
Regards
Craig

[stoney69]

Tried plugging into lipo s again with a new leads and they get hot straight away and the esc ,
Don't know what to do
Thanks again
Craig

[Cremegg]

Could be a short in the esc causing it

I'd double check everything and try to connect it up again

[Jason A]

I think that you will find something is fried.

I would take a look at the caps first and see if there is any signs of burning on them.

Also take the speedo out car and fully look at it for signs of burning or possible shorts.

Have you tried unplugging the motor then plugging the batterys in ?

If you have everything wired right and the battery plugged in the right way round then its got to be the speedo thats gone.

[stoney69]

It's a ezrun 60 amp sl v1
With matching 5.5 motor

Craig