DB01 DURGA BASE HOP-UP

[durgaPL]

I think for db01 base hop-up is slipper clutch and TRF damper set what you think about it?

[DCM]

slipper clutch
front CVD's
3Racing wishbone holders
rear CVD's
TRF Shocks

In that order

[mog ruith]

cvd are great to have but what is a 3racing wishbone holders?
if i may ask

[DCM]

they replace the plastic suspenion shaft holders with alloy items. I know that you can stop the wishbone pin from popping in an accident by shimming the suspension tight, but Alloy is better

[mog ruith]

so you bought the 3 racing ones instead of the tamiyas??

[romandesimone]

I know it's blasphemy, but the 3 Racing products are cheaper.

I would rather use Tamiya but 3 Racing are making it hard.

[phongsie]

Originally Posted by DCM

slipper clutch
front CVD's
3Racing wishbone holders
rear CVD's
TRF Shocks

In that order

Hi guys,
Im new to R/C and so far i've only got a Super Clod. I love it and was going to modify it, but now want a buggy instead so I can race. I want to buy all the parts I need in one go so I do have to take it apart again (my first build was the super clod and it was tough!).
About the mods that DCM has mentioned, I can't find the CVD's or the wishbone holders. Its either that or I have seen it but don't recognize it cause its all just parts to me. Can someone please tell me the exact name of the part or give me a link to the parts?
Also, the front-one-way pulley thing, do I just have to buy that pulley (1 round gear-looking thing), or do I have to buy the kit?

Any more suggestions would be appreciated.
Cheers

Also, any feedback is great, but please keep in mind I have no idea about r/c terminology.

[DCM]

you don't need a one-way in this car..... honest.

Where are you looking and where are you buying from, if over the internet and got paypal, try www.rcmart.com

[jimmy]

I don't have any CVD's or alloy wishbone holders or carbon anything - and I placed my car 40th in round at kiddy National

My favorite bits would be (in order)

tonys hex screw kit
501X shocks
slipper
one way
rear 501X diff halves
metal suspension pivot balls

I think that's about it.

[DCM]

I tried the plastic holders... well, I should say my test team (the kids) did, and managed to pull a wishbone out each time.... so I am gonna stick with the alloy.... Jimmy is just tight