X6 Anti-Squat Shimz / DMS

[Chequered Flag Racing]

As of 16:00 hours today, Friday 25th July 2008 please contact DMS Racing for a set of the X6 Anti Squat Shimz.

Thank you to all who ordered a set from me

CFR

[Darren Boyle]

Thanks Glenn,
Yes anyone wanting the famous Carbon Fibre Shimz for the X6 then just give us a shout, our first order for them will be going in monday they may well have a slight alteration to them also. Keep an eye on our website for details of them soon

[strobe]

Darren
Are these available from your shop yet.

[Darren Boyle]

We have had the design changed ever so slightly to be a better fit on the 4 gear version of the car, the drawings were approved yesterday and the go ahead on the first batch of 20 goes into production today. We should have stock hopefully end of this week or early next, they will proudly be displayed on our website as soon as we have them in our hands. Orders are already being taken if you want some.

[Lee]

This may be a daft question, but......

Is there any chance of buying individual shimz, i lost a 3 degree one when i broke a toe in block.


* Lee sits awaiting the torrent of abuse*

[ben]

stupid touring car driver's

[bigred5765]

Originally Posted by Lee

This may be a daft question, but......

Is there any chance of buying individual shimz, i lost a 3 degree one when i broke a toe in block.


* Lee sits awaiting the torrent of abuse*

here it is,
there only a tenner tight ass,

[Swiss]

May be a daft question, brought some of these shims the other day and wanted to know what the small carbon plate is for??? Is that an extra shim? As it has a differant configuration to the other shims.

Thanks

Paul

[Lee]

It sits vertical against the back of the toe in block, to stop the shim sliding out i assume

[Mike Hudson]

lee's correct with what he said

[CharlieF]

Hi Swiss and Lee.
I too bought some of these CF shims and fine products they are. Darren said it was obvious where they went but even with 15 years experience I managed to get it wrong. It is obvious once your are shown how they go but if you lose one before the penny drops (as we so nearly did - that odd shim is the retainer by the way Swiss) it is a big loss.
In my own defence I was trying to fit the shims to a car I had just built so X6 car knowledge was zero on my part.
Regards.

[matdodd]

Is the X6 yours or Andy's?

[Darren Boyle]

Yep. the extra shim is indeed the retainer to prevent your chosen squat shim from sliding out should anyhting come loose etc. You will all be pleased to know that we are now offering this "shim" as a seperate part too should any one lose or break one. Also bear in mind that "some" combinations of anti squat can be achieved by adding two smaller shims together should lose/misplace any.

The full range of "DMS X Partz" will be hitting the X-Factory UK site (www.xfactoryrc.co.uk) and are already on our shop site too.....

[CharlieF]

Originally Posted by matdodd

Is the X6 yours or Andy's?

Hi Mat.
It's Andy's. He had one meeting with it and I cant get it back off him. I think he was saying things like "How cool is this car to drive - it stays on line and doesn't do any random stuff!!"

[matdodd]

I thought he might like it, hes got good taste