What gearing on a TM2 for 7.5 motor

[DerbyDan]

As the per the title really - just finishing off building my TM2 & I just wanted to confirm what gearing (pinion) would be a good starting point - my motor is a 7.5 LRP X20 & shall be mostly racing indoors at Silverstone

Thanks in advance

Dan

[StevenBest]

Originally Posted by DerbyDan

As the per the title really - just finishing off building my TM2 & I just wanted to confirm what gearing (pinion) would be a good starting point - my motor is a 7.5 LRP X20 & shall be mostly racing indoors at Silverstone

Thanks in advance

Dan

Hi Dan,

To start I ran the standard 21 which powers out the corners well but you just top out straight away on the straight.

The 23 is nice and smooth and gives you a good end of straight speed but out the corners I found it was a bit slow.

The 22 is the best I would say. I used it for the first time at the weekend regional and I ran it yestarday. I doesn't top out neither does it lack out of the corners.

I run the X20 6.5, it's preety quick anyway but i guess its what you prefer.

Hope this help's

Steven

[jaywestwood]

At regional i ran 24t pinion with a little turbo. I also turned up the punch on speedo to get it off corners... Was plenty fast enough
HTH
Jay

[DerbyDan]

Thanks guys!

Steven - I guess your gearing is what you run with the 6.5 LRP?

Jay - Ironically I had a 24tooth pinion in mind as seemingly being what would work ok, but my 24t pinion is one of the old Losi ones (& I mean REALLY old!) that is about as wide as the RW spur gear & I just can't squeeze it on when the motor is in place - so its currently got a 23 fitted. As I'm not going to run any boost I wonder if my 25 would be OK?

[Smartalec]

Originally Posted by DerbyDan

Thanks guys!

Steven - I guess your gearing is what you run with the 6.5 LRP?

Jay - Ironically I had a 24tooth pinion in mind as seemingly being what would work ok, but my 24t pinion is one of the old Losi ones (& I mean REALLY old!) that is about as wide as the RW spur gear & I just can't squeeze it on when the motor is in place - so its currently got a 23 fitted. As I'm not going to run any boost I wonder if my 25 would be OK?

Hi Dan, I run 24/87 on my 6.5 so I'd (personally) go up a couple of teeth, but I know others who are running much lower so its a personal thing I'd say. Start with the 25 and see how you get on

[Adam F]

Running 27/85 on my orion 7.5...