|
|
#1
|
||||
|
||||
![]()
Hi guys,
I'm having a little bit of trouble with my ball diff and would dearly love to swap it out and put in a gear diff. I've seen this kit - TU0210 - and was just wondering whether any of you guys had tried it on your TC02C? Cheers, Joe |
#2
|
||||
|
||||
![]()
Won't fit I'm afraid, for the rear motor car only
__________________
John Jones --SMD--INSIDE LINE MODELS--PR RACING UK-- My feedback http://www.oople.com/forums/showthread.php?t=79696 |
#3
|
||||
|
||||
![]()
Ah well, never mind, thanks for replying John.
![]() |
#4
|
||||
|
||||
![]()
Hi mate, what problems are you having with the diff, might be able to sort it ;0)
|
#5
|
||||
|
||||
![]()
Hi,
Just having problems getting the diff tight enough so it doesn't slip. It's not like I'm not experienced; I've been in RC racing since the Pro Cat days. I read about shimming it, but I can't find the shims of the right size (17 x 23 x 0.1mm?) If you have any ideas, I'd be interested. I'd prefer a gear diff solution but it appears that's not an option for this car. Cheers anyway, Joe |
#6
|
|||
|
|||
![]()
what ring and balls are you using? I went with the BFast kit on mine, come with copper shims and you have the choice to use carbide or ceramic diff balls.
__________________
Team C Canada Team Driver TC02Evo - TS2 - TC02T - TC02C TM2 - TM2SC - TM2T(Frankenstein) |
![]() |
Thread Tools | |
Display Modes | |
|
|