|
|
#1
|
|||
|
|||
![]()
Hi guys
I just bagged myself a 2wd 1/10 buggy on here and wondered what tyres/inserts work best at Caldi? See you all on Friday |
#2
|
||||
|
||||
![]()
Schumacher Minipins! Simples
![]()
__________________
AKA: Andy Nancollis 1/10th drives: Yokomo BMax2MR & BMax4 1/16th drive: Carisma GTB Racing in South West: http://www.mendiprcraceway.co.uk/ Racing in Wales: www.caldicotrcracers.co.uk Kept running by: Yokomo via MB Models & www.tracksidespares.co.uk Shells by Square Crabs |
#3
|
|||
|
|||
![]()
Thanks Andy, is that yellow pins? And what about inserts?
|
#4
|
||||
|
||||
![]()
Basically anything 'Schumacher yellow' will work to a degree.
Minipins give the best ultimate grip but can make the car twitchy on steering. On my 2wd car indoors i like spikes rear with medium Schumy insert and either spikes front with cut medium insert or cut staggers and no insert. Gives a nice predictable car without the front feeling too lazy. Really it depends on your skill level and car to what will work best for you ![]() |
#5
|
||||
|
||||
![]()
I've been using Kangawollafox inserts in my (F&R) tyres the last couple of years...basically like a medium, chubby schumacher insert I think.
This makes sure the tyres are well filled, and not too soft. Which on medium/high grip is far more consistent IMO.
__________________
AKA: Andy Nancollis 1/10th drives: Yokomo BMax2MR & BMax4 1/16th drive: Carisma GTB Racing in South West: http://www.mendiprcraceway.co.uk/ Racing in Wales: www.caldicotrcracers.co.uk Kept running by: Yokomo via MB Models & www.tracksidespares.co.uk Shells by Square Crabs |
#6
|
|||
|
|||
![]()
Thanks guys very helpful as usual
|
![]() |
Thread Tools | |
Display Modes | |
|
|