|
|||||||||||||||
|
|
|
#1
|
||||
|
||||
|
Hey you guys, I thought that, since there is a "show us" thread for the SCs, I would create one for it's down trodden but older brother, the stadium truck. With it's big wheels and it's unrealistic look, it does have a more aggressive stance and arguably, a more race orientated chassis.
So I'll kick off with my el cheapo Team C TC02T, Which so far, Have not had chance to race properly but have done a few laps at my local club. Running an old Novak GTB, with an SP 6.5 sat in the back. Savox low profile up front. Team C Ali front wishbone mount with brass insert, and Paint by Magoo. Lets take a quick look: ![]() ![]() Let's keep 'em coming chaps
__________________
Answer RC SWorkz 35-3 SWorkz 350T SWorkz S12-2 Instagram: crazylthirteen Blogger: http://the-croucher.blogspot.co.uk/ |
|
#2
|
||||
|
||||
|
Can I play?
Here's my mid-old school Losi XXT ![]() Its the top-spec Graphite Plus model, i restored/cleaned it up a year or so a go & now runs a sensorless brushless set-up in it. The shell (Which was NOS from DMS) represents my first attempt at using liquid mask ![]() ![]() I haven't raced this truck, but it makes a good fun park runner
|
|
#3
|
|||
|
|||
|
what front and rear tyres is everyone running? I was thinking schumacher yellow mini spikes for the rear and stabbered ribs for the front, but seem to struggle with rear end grip mid corner
ta ps will post pics shortly when shes clean
|
|
#4
|
|||
|
|||
|
Lots of racers this time of year are resorting to using the JConcepts Goose Bumps (in Green compound) which are very good in the moist conditions on astro etc...
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
|
#5
|
||||
|
||||
|
We found, so far, down at Torch, Losi step pins in red work well, with staggered ribs up front so far. Was lacking in off power corner speed, but modded the ackerman. Much better now
DerbyDan, I had a old XXT, back in the late '90s. Mine too came with the Damn Yankees membership card, as I bought it from DMS, oddly enough. They were THE Losi dealer at the time.
__________________
Answer RC SWorkz 35-3 SWorkz 350T SWorkz S12-2 Instagram: crazylthirteen Blogger: http://the-croucher.blogspot.co.uk/ |
|
#6
|
|||
|
|||
|
Quote:
(even after 21 years in the business)
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
|
#7
|
|||
|
|||
|
Actually, I was so disappointed of what you stated for. I am also experiencing this kind of problem and us of now, I am planning to make a stadium car. Moreover,this car contains of good features such us complete wheels and good tires.
|
|
#8
|
||||
|
||||
|
Any idea where sell these in the UK? Struggling to find one
|
|
#9
|
||||
|
||||
|
No sorry, I got mine from dinball iirc. $105 which didn't include postage of course, but I went for cheap (read: slow) which took a week and a half. I originally took a look at SMD, considering they're the disty, but JB doe's not do them. Saying that, If you asked him nicely and offered him a curry and a nice bottle of wine, he might get you one especially lol
__________________
Answer RC SWorkz 35-3 SWorkz 350T SWorkz S12-2 Instagram: crazylthirteen Blogger: http://the-croucher.blogspot.co.uk/ |
|
#10
|
||||
|
||||
|
Wow, this thread has died a death eh.
Just working on a tweak for my TC02T, including lowering the shell as I think it's mounted too high. Also, stumbled on a couple of ali bits from ebay. Pics of the tweaks coming soon.
__________________
Answer RC SWorkz 35-3 SWorkz 350T SWorkz S12-2 Instagram: crazylthirteen Blogger: http://the-croucher.blogspot.co.uk/ |
|
#11
|
||||
|
||||
|
I hope it dont die i like this yhread maybe more clubs could do more like silverstone to promote trucks as they are brilliant outside
|
|
#12
|
||||
|
||||
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|