2 gearboxes 2 gear diffs both bind?

[MikePimlott]

Whilst in mid motor configuration i have tried 2 new gearboxes and 2 gear diffs and when the gearbox is tightened up it binds?

ball diff in both gearboxes works fine but both gear diffs are not allowing me to fully seal the gearbox.

any ideas? ,there is no side to side movement in the gear diff so is it just too big ?

[cryer-evo]

i did find that my self just nip up gear box and run it it will free up with time

[nicmo]

just unscrew a wee bit the gearbox screws and it will be fine.

[MikePimlott]

Originally Posted by nicmo

just unscrew a wee bit the gearbox screws and it will be fine.

Yep i did that, but when you screw it into the chassis it tightens back up again.

[Adyb]

Hi,

Did you solve the problem, if so how? cos I got the same issue.

Thanks.

[cunawarit]

I had that issue, I simply loosened the screws until it freed up.