22 mid motor setup

[Madman1]

Hi just got a new 22 and built it mid motor cuz of the high bit that my local track has. And I'm having a really hard time finding a good base line setup to start at. The track I run at is high bit clay (wet) and as the night goes on it starts washboarding. Car works really well right now but very twitchy. So if you guys could help me out on a solid setup from tires to shock piston and everything embetween I would appricate it. Thanks.

[Frecklychimp]

Have a look here matey:

http://www.petitrc.com/setup/losi/Se...TwentyTwo.html

There are a few clay/dirt set ups for mid motor configuration.

[Madman1]

Anytime I click on them from that site it comes up blank. That's why I was asking on here. Iv looked everywhere.

[Arn0]

Originally Posted by Madman1

Anytime I click on them from that site it comes up blank. That's why I was asking on here. Iv looked everywhere.

What device are you using? Computer or I-device?
Some people have trouble reading pdf with some apple stuff.

[Madman1]

Originally Posted by Arn0

What device are you using? Computer or I-device?
Some people have trouble reading pdf with some apple stuff.

iPhone

[cryer-evo]

Try this out

Front suspension
Toe +1
Ride height 19mm
Camber -1 deg
Caster 5deg
Kick angle 25deg
Sway bar no
Oil 27.5
Piston 55
Spring blue my be one softer
Spindle type trailing
Shock limiters 2mm
Shock location 2 on tower outside on arm
Bump steer no spacers
Camber link 2 with no spacers

Rear suspension

Toe 4 deg
Anti squat 2 deg
Roll centre lrc
Ride height 20mm
Camber 2 deg
Rear hub spacing middle
Hex width stock
Sway bar no
Oil 25
Piston 55
Spring yellow
Shock limiters no
Camber link 1 with 1mm under and E with 1mm under
Shock location 2 on tower/ outside on arm
Battery saddle

If you can get hold of a cream waght that would help a lot our put about 40g of lead just in front of motor underneath the brace

Make shour you are running the same tyres as most the peaple at your track

Please give it a go and let me now if its any better