VRC - Help

[andy110m]

Hi All,

I've been trying tonight to get on the VRC bandwagon and give it a try, problem is I can't calibrate my tranny to it.

Helpfully someone has posted a video on you-tube on how to do it but they choose to do it in silence and not actually talk you through how to do it, so its useless.

Can anyone help, it seems that only one side of the throw works, either full throttle or brake, left or right.

As I said help on here would be good please, or anyone round the Preston area that might be able to help, please drop me a PM.

Thanks very much.
Andy.

[stew_zs]

Have you set up your vrc on your control panel first ??? Not just in game ??

[MatJohnson]

Which transmitter is it?

[andy110m]

Hi,

The transmitter is the Sanwa MT4, I'm using it with a sanwa receiver 92014.

I've not done anything in the computer control panel. I've only opened the VRC calibration setting which opens a windows style box, this is where is doesn't do what I'm expecting.

So idea's welcome.

Thanks.

[Danny Harrison]

Put the usb in first till computer recognizes it. Then attach receiver and turn on tx. Now go to devices, game controller and calibrate it. You should see dot go left to right and up and down. It will settle in middle. Apply this and it should then work. I can maybe talk you through it if you have issues

Originally Posted by andy110m

Hi,

The transmitter is the Sanwa MT4, I'm using it with a sanwa receiver 92014.

I've not done anything in the computer control panel. I've only opened the VRC calibration setting which opens a windows style box, this is where is doesn't do what I'm expecting.

So idea's welcome.

Thanks.

[MatJohnson]

Mines different to that, I need the controller on BEFORE I plug the usb in. I also had to do some tweaking of the mixers on mine but that was after it was registering with the machine.

Does it recognise the new hardware being pluged in?