Jorn Running Big Bores On 410 :O

[av4625]

He said he used Haras setup and it was good!
Anyone no wat hara is running? he has different springs not TD springs! they arnt TD shock bodies either!

[OneKiwi]

I didn't notice the BBs on Jörns, maybe he has finally found a good setup for them that he likes or he got told off and told to run them

The shock bodies are the Tresrey mos ones I think
He might have the AVID or CORERC springs if Tresrey haven't started doing springs.

Im interested in his setup BUT we don't run a lot of clay tracks here. He said that the 410 and Jörns setup (from previous year ) that he started with was very agressive so he was planning to tame it a bit. Interesting to see what he has done

[stegger]

Hara was running Avid springs.

[jo90]

I'd take a guess at Avid to as Hara is one of their factory drivers isn't he, plus they seem rather short compaired to the normal TD springs don't they (the collar on the front shock is really way down the shock body).

Either way im sure he will run whatever gets the car to the front of the field and im sure TD won't give him grief for using the right spring for the job. I know of one company that gets the sh*ts about it's drivers using anything other than it's parts (even if it sacrifices a top 10 place).

Good though that the 410 is still in it when it comes to international competition given that it is about 2 or so years old design wise now (the basis of it, upgrades to it in V3 not so old but they are simply changes). Goes to show the design works !

[MiCk B.]

I can't be 100%.

But from the photos, (www.neobuggy.net)




They do look like AVID, spring.

Yellow rear AVID spring is a 1.99lb (batch 1) or 2.15lb (batch 2)
Front Purple spring is a 3.61lb (batch 1) or 3.79lb (batch 2)

(In stock at www.p-dubracing.co.uk)

MiCk B. :-)

[jo90]

Definately the Tresrey MOS coated bodies and shock bottom/o-ring retainer. Also look like Tresrey alloy hexes too.