BUYING AN X6

[timmy121]

PUTTING AN ORDER IN FOR A X6 IN THE NEXT COUPLE OF DAYS JUST WONDERING IF THERE IS ANY SPARES OR HOP UP'S THAT ARE A MUST HAVE FOR THE CAR
CHEERS

[Spencer Mulcahy]

Get the E-speed rear camber links and the motor plate brace thingy Losi axels I drilled the original AE ones and it works fine. For some bling the racers edge rear hubs and the K factory front shock tower. I broke the rear hinge pin block and a wing mount on saturday but changed the wing monts to xx4 ones after wich will give a bit more in a crash. Hope that helps but one of the team drivers will add to this.

[bigred5765]

Spencer's got most of it in, the must haves are, espeed alloy motor plate brkt, espeed hangers,bk2 gen 2 axles,all the rest are personnel prefs, losi shocks help all the team drivers use them so pinching a set up is essayer,but not essential

[Big E]

The car does seem to run better with Losi shocks so that are maybe something you want to think about if you don't have them.

Otherwise for spares really you just need a rear tower bulkhead, some spare rear pins, a spare toe in block and maybe a pair of wishbones to start with.

E.

[timmy121]

OK CHEERS GUY THINK I'LL PUT IN AN ORDER WITH DMS
CHEERS

[Darren Boyle]

Look forward to it........