|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
20-06-2008
|
||||
|
||||
Just ordered X-6
I've seen the light. What a car. Normally I shy away from conversions and the like, but I tried my mates X-6 a week or 3 ago and you just cant deny the facts. It was unbeleivable. I have never driven anything that comes close. So thats it. Hopefully it will arrive tomorrow and then I'll be in build mode. Anything I should watch out for? Any tips or hints would be gratefully received. I have losi shocks, e-speed camber thingys and rayspeed hubs and k-factory tower on back order. Also its coming with cr axles? Was told to get them. Thanks in advance.
__________________
 PBM Racing 01773 769323 TEAM XRAY RC DISCO 
|
|
#2
20-06-2008
|
||||
|
||||
|
__________________
Life's too short to go slow! www.ymr.no Tech Tips, HopUps & Bling Xray 2014 XB4 4WD & 2WD | B4 FTW Night Fox XL | Mugen MRX-5 | RB | Futaba 3VCS FASST | Faskolor Visit my showroom
|
|
#3
20-06-2008
|
||||
|
||||
|
Your bases sound covered, one thing though it's a personal preference. Use the stock B4 (FT ideally) servo mounts and drill the chassis. You can mount the servo a few mm further back which means you won't have to dremel any of the front area where some servos catch.
Also if you have the plastic (not E Speed) motor plate clamp, put nuts on the other side of the screws so you can do it up nice and tight and not have to worry about stripping the plastic. Build directly with Ellis latest setup!
__________________
 Nortech is ACE!
|
|
#4
20-06-2008
|
||||
|
||||
|
or simply use a low profile servo
__________________
Life's too short to go slow! www.ymr.no Tech Tips, HopUps & Bling Xray 2014 XB4 4WD & 2WD | B4 FTW Night Fox XL | Mugen MRX-5 | RB | Futaba 3VCS FASST | Faskolor Visit my showroom
|
|
#5
20-06-2008
|
||||
|
||||
|
Wouldn't you still have to use B4 posts and mount further back to avoid dremelling as the front profile I've assumed is essentially the same as any KO or similair servo?
__________________
Nortech is ACE!
|
|
#6
20-06-2008
|
||||
|
||||
|
No, direct fit. See tech section on www.2wdrc.com
__________________
Life's too short to go slow! www.ymr.no Tech Tips, HopUps & Bling Xray 2014 XB4 4WD & 2WD | B4 FTW Night Fox XL | Mugen MRX-5 | RB | Futaba 3VCS FASST | Faskolor Visit my showroom
|
|
#7
20-06-2008
|
||||
|
||||
|
Quote:
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class
|
 |
| Thread Tools | |
| Display Modes | |
|
|
X-Factory
Hybrid Mode
