|
|
#1
|
|||
|
|||
![]()
I have got myself a losi 22, iv been in tc for about 8 years now and wanted a new challenge with off road. Now im running at maritime's indoor track and was just after some help with setup and vasically were to start so i can begin to fine tune for my own driving style.
Cheers Billy |
#2
|
||||
|
||||
![]()
Hi Billy
See the attached sheet for a starting point at Maritime Raceway, this set up can be achieved with whats in the box and the addition of a pair of green front Springs (as I feel the ones that come with the kit are too soft). I have also attached my set up from round 1 so you can see the things that are different from whats in the box (4mm trailing front axles, 3 deg caster etc...). If you get in to Off Road Wars this weekend come see me ![]() Here is a good source of info on the 22 that Andy Carter wrote a few year back but is worth a read if you're new to the car/class. http://www.oople.com/forums/showthread.php?t=65680 HTH Chris |
#3
|
|||
|
|||
![]()
Thanks chris! Appreciate the help massivly. Dont know if its because im on my mobile but i cant see the attatchments :-(
Ill do my best to get into off road wars. May be to late now i have got other championship commitments this weekend. Will you be at round 3? |
#4
|
||||
|
||||
![]()
No problems mate, I had problems attaching the set ups but have now resolved them
![]() Yeah I will be at round 3, so if you dont make it this weekend come say hi and have a chat then. |
#5
|
|||
|
|||
![]()
As i pressed post both attachments appeared. Thank you for.them mate and ill only be racing for the morning so i may pop to the meet to see a few friends. So if ill do ill introduce myself.
Will these setups be ok for a fairly aggressive driver lol |
#6
|
||||
|
||||
![]()
My set up I feel I can push hard, but as for the other set up im not sure as I've never driven it (but have written down a set up I feel will work well out of the box). If you feel like you are above average on the aggression scale maybe look to get the Blue and Black front spring for a quick change trackside.
|
#7
|
||||
|
||||
![]() Quote:
I ran 0 degree to start but 3 changed it for better as final change i did!! That was on a speartooth chassis but defo put that set up on my standard chassis car too! Thankyou |
#8
|
||||
|
||||
![]() Quote:
![]() If you tweak it any further to suit the worksop surface get the set up on here for others ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|