Yokomo Bx-4 on S2 and S4

[Thomas P]

Hi, this is a emergency, recived my rear hubs FOR Yokomo so i can get more toein on the rear... this day, and when i was going to mount them, the B4 ballbearing doesnt fit...on Yokomo it is 10mm in the hub and the B4 is inch..any tip for this ?

[Lee]

Loctite bearing fit, depending on how big the gap is?

[Thomas P]

aint sooo much, say app a alu can (fanta or coke) on one side..

[josh_smaxx]

So long as the bearing doent rattle it shouldnt really be much of a problem, the stub axle holds it in one side and the axle spacer the other, so if you can fill the gap with something like a can or other then it shoudl be OK

[Thomas P]

nope, wont fit... D**n...

i have to talk to the Yokom boys and se if the CVD from there buggy may fit the BJ4 (S4 and B4/S2)


Thanks for the support guys

[josh_smaxx]

Originally Posted by Thomas P

nope, wont fit... D**n...

i have to talk to the Yokom boys and se if the CVD from there buggy may fit the BJ4 (S4 and B4/S2)


Thanks for the support guys

Thats your only other option.

[Thomas P]

yepp, posted a Q in the Yoko section..


Any tip where i can buy 0.5 AND 1.0 rear hubs for the B4/BJ4 - S2 and S4