Go Back   oOple.com Forums > Car Talk > X-Factory

Reply
 
Thread Tools Display Modes
  #1  
Old 15-10-2012
KickMe's Avatar
KickMe KickMe is offline
Member
 
Join Date: Jul 2011
Location: Paris
Posts: 52
Default Adapting setup to less-than-ideal tires

Hi X-family,

In two weeks I'll run in the CML offroad masters, an indoor carpet race near Paris. Some of the best French drivers will try to compete with English guests Tom Yardy, Keith Robertson and Neil Cragg.

The race is sponsored by CML, so the mandatory tires are Fastrax Turf Rippers. From what I heard, we will probably miss our Schumacher yellows a lot during the week-end (that was the most polite way of putting it).

Have you ever tried these tires? If there really is a motricity problem, should I use parts of a dirt setup, like raising the gearbox? Or should I keep my base setup and concentrate on my driving?
__________________
Reply With Quote
  #2  
Old 18-10-2012
elvo's Avatar
elvo elvo is offline
Senior Member
 
Join Date: Sep 2006
Posts: 913
Default

Use 0° of anti-squat, be near 65% rear weight and don't worry too much!
__________________
Reply With Quote
  #3  
Old 18-10-2012
Darren Boyle Darren Boyle is offline
oOple Advertiser
 
Join Date: Jan 2008
Location: Watford, Herts
Posts: 4,501
Default

We ran those once here in the UK on grass, they are most definately NOT a Schumacher yellow, however they were not too bad. The rubber is weird, comes out of the packet "hard" but the more you run them and move the rubber around the softer they seemed to get, almost like plasticine/blu-tak...

Also, some team drivers have speok about "softening" them too, with several methods talked about, including motor spray on them ;-)

Otherwise as Elvo has said, treat your set up as "normal"
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER
AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF
AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI
X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ
TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ
Tel : (01923) 816636
Reply With Quote
  #4  
Old 30-10-2012
KickMe's Avatar
KickMe KickMe is offline
Member
 
Join Date: Jul 2011
Location: Paris
Posts: 52
Default

A little follow-up: I used my normal astro/carpet setup with a brass bulkhead to get back some steering. Like most drivers, I put the tires inside out, cut out the inside reinforcement strips (4 on rear, 1 on front) to soften them. No tire additive allowed for this race.

I found the car very easy to drive gently, but I couldn't pick up the pace without making costly errors. Oh well.

The tires worn out very fast, losing what little grip they had after 10 to 20 minutes, nearly slicks after 30 minutes. Less than the time preparing and gluing them
__________________
Reply With Quote
  #5  
Old 31-10-2012
YoungChazz's Avatar
YoungChazz YoungChazz is offline
Mad Member
 
Join Date: Mar 2006
Posts: 1,073
Default

At some U.S. tracks we get one 5-min run on a tire -- glue up 4-5 sets for a day of racing. At most tracks we get just one day from a tire. New set every race or practice day. Sounds like you got a lot of wear...
__________________


Engineering Without Fear
www.XFactoryRC.com
www.facebook.com/XFactoryRC
Reply With Quote
  #6  
Old 31-10-2012
Darren Boyle Darren Boyle is offline
oOple Advertiser
 
Join Date: Jan 2008
Location: Watford, Herts
Posts: 4,501
Default

Quote:
Originally Posted by YoungChazz View Post
At some U.S. tracks we get one 5-min run on a tire -- glue up 4-5 sets for a day of racing. At most tracks we get just one day from a tire. New set every race or practice day. Sounds like you got a lot of wear...
You have never run these tyres Chazz, they are "special"
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER
AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF
AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI
X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ
TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ
Tel : (01923) 816636
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com