|
|
#1
|
||||
|
||||
![]()
HI
Just bought a car a car off the bay and its coming with a CX-11HF esc. Im going to run my cyclone anyway but just wondered if any one knows anything about the CX only out of interest |
#2
|
|||
|
|||
![]()
From what I recall the cxii is a good esc from ko propo. They released several speedos in the cx series.
I'm sure the cyclone is an excellent choice though! You may want to ask Bormac as he probably knows more. Obviously it depends what setup you use or if you want to be era specific ( e.g. Lrp ICS in a pavidis '95) |
#3
|
||||
|
||||
![]()
Yes i did think that i remember getting the ICS first gigh end speedo !!!! got so excited installed it all connected it the wrong way round and it went pop gutted !!!!!
im unsure what to do about cells !!! any ideas |
#4
|
|||
|
|||
![]()
Yeah the ICS series is great!
Either you can go vintage with scrc Sanyo ...or look for Voltz nimh saddle. You can find them on cml or eBay. Lipos are not very straight forward to install. You need to check the dimensions and how the saddle posts go. You could alternative strap them down using battery tape. Moreover lipos may affect weight distribution so some thought may be required here. I would just go for an nimh setup. |
#5
|
||||
|
||||
![]()
Yes im looking on the bay but cant seem to find them ?
|
#6
|
|||
|
|||
![]()
Look at this on eBay:
Voltz 5300mAh 7.2v Saddle Pack with Tamiya Connector http://bit.ly/ONX7QD See cml aswell |
![]() |
Thread Tools | |
Display Modes | |
|
|