Ezrun no braaaaakeeeee!!!!!!

[franki]

Hi,

Can you help !,,, I have the ezrun combo and set it up on my ko transmitter and I seem to have no brake at all ???? I have set up speedo as instructions say but when I pull bake I have no brakes at all it just free wheels and dosnt stop the car !! I need to know how I can get it to stop before a tree does it for me !!!!

Thanks in advance

[metalmickey0]

Do you have brakes set to 100% on esc and tx?

[luniemiester]

Do u have the programming box available. If so set it so the brake force and reverse force are both 100%

Then set the EPA for both throttle and brake on your radio to 95%. Reprogramme the esc at these settings then after you've done that up the EPA back to 100%. That should solve the problem - otherwise it might be a duff capacitor

[franki]

Unfortunately I don't have the program card

[luniemiester]

You can do it without but it's the usual counting flashes etc

The manual is below and the setting is on page 3

http://www.hobbywing.com/uploadfiles...l/HW-13-v2.pdf

[franki]

Originally Posted by luniemiester

You can do it without but it's the usual counting flashes etc

The manual is below and the setting is on page 3

http://www.hobbywing.com/uploadfiles...l/HW-13-v2.pdf

Thank you ill give it a go lol!

[franki]

It makes no sense to me !!!!