|
|
#1
|
|||
|
|||
![]()
Hi Guys
I am going to get a brushless setup for my kyosho lazer zx-5 but am struggling to decide between a novak GTB of mamba max system. I am very tempted by the mamba max but do you think a 7700Kv motor will be too powerful for the buggy. I am guessing here but i think this works out as about a 5 - 5.5 turn motor and would produce 46200rpm on 6 cells. The next size down is a 5700kv motor which is about a 7.5 - 8 turn motor and would produce 34200rpm on 6 cells. Finally there is the novak systems which have more options: Turn speed KV 3.5 10,500 4.5 9,000 5.5 7,400 6.5 6,400 7.5 5,800 Which system do you think would be best suited for the ZX5 and whats the fastest motor you would risk? Cheers Trev Last edited by codieskid; 18-09-2006 at 07:09 PM. |
#2
|
||||
|
||||
![]()
I use the Novak 5.5 in my X10.
G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#3
|
||||
|
||||
![]()
I have used the Novak but never actually seen the Mamba. I had a look at it on the website and I have to say i'd go for the Novak if it was a choice between the two. The Mamba looks more basher oriented - but maybe I am wrong.
|
#4
|
||||
|
||||
![]()
unfortunately you are matey hehehe, I have a mamba max, which is aimed squarley at the racing scene, its super effiecient, ballistically fast, but smooth, good acceleration, and good braking, and its good value, with software to connect it to your laptop or PC and adjust settings. ( which i'll be doing at gtcc this sat :-D)
__________________
Who am I fooling? I love oOple
![]() |
#5
|
|||
|
|||
![]()
is it BRCA, ROAR, IFMAR, or EFRA legal?
|
#6
|
||||
|
||||
![]()
Mamba isn't, the Novak and LRP/Reedy ones will be.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
![]() |
Thread Tools | |
Display Modes | |
|
|