help i broke my 410

[jake1*2011]

Hi

i was messing around in the carpark at work and my 410 hit the curb at full throttle(lost sight of it) i drove it back to see the damage and there was bits everywhere

Now the motor is inttermitent, youve got to turn the pinion whilst using the throttle (by the way it hurts) and the spur gear jumps around, it also sounds like theres teeth missing, i also cracked the lipo case, battery holder!

Can anyone help with the motor and spur problem please

[/tobys]

can you post some pics of the car/drivetrain?

[mark christopher]

check your sensor wire is in correctly

[jake1*2011]

Will try and load pics in a bit, pics not very clear but easily seen!

With the sensor wire do i unplug it from both ends then plug back in, or one at a time? Just checking because i dont want to make it worse!

[hit5005]

Originally Posted by jake1*2011

Will try and load pics in a bit, pics not very clear but easily seen!

With the sensor wire do i unplug it from both ends then plug back in, or one at a time? Just checking because i dont want to make it worse!

Sounds like you've bent the moter shaft slightly of the meshing has gone tight

[jake1*2011]

Originally Posted by hit5005

Sounds like you've bent the moter shaft slightly of the meshing has gone tight

Surely the spur would break before the motor shaft gets bent, i would of thought that because it was a front impact the spur would of been pushed backwards not to the side,

Oh yeah and i broke the bit where the battery strap is clipped to !