Tekin RS Pro / Hotwire

[Skye]

I have recently purchased the Tekin RS Pro and the Hotwire and last weekend I had it all hooked up to my laptop so I could personalise the settings.

When I first connected it, it downloaded the latest software onto the ESC. Having updated the software though meant what I saw on the computer screen didnt entirely match up with what the user guide online displayed, although it wasnt hugley different so was no real problem.

The problem I am having though is with the throttle curve profiles. The default is linear (profile 3), which is fine, but I did try changing this to a softer initial throttle response. When I click for it to save the settings I have changed, it saves every setting I have entered for all the other variables, but when I exit out of the software and then go back in, whilst all my other settings are as I set them, the throtle curve is always still showing as profile 3.....

So.... is there something different I have to do to save a change to the throttle curve, or is there a bug in the new software release?

Has anyone else experienced the same issue? Or am I just being a muppet......

[DCM]

I have not had this issue, pm rpike on here, he is the Tekin development manager.

[Skye]

Thanks DCM, I will do.

[arransmith27]

I had a very similar problem with version 212 whereby the minimum throttle setting kept defaulting back to '10' (all other settings saved ok).

I re-updated my RS Pro by re-downloading the 212 software from the Tekin website which cured the problem.

Maybe worth giving it a try

[Skye]

Thanks Arran, it is worth a try! Think it was v213 it downloaded at the weekend? I will try downloading it again and see if it makes a difference.

[DCM]

Should be on v223 (I think)