|
||
|
 |
|
||||||||||||||||||
|
|
|
#2
15-07-2012
|
|||
|
|||
I've already asked.
http://www.oople.com/forums/showthread.php?t=103712 
|
|
#3
15-07-2012
|
|||
|
|||
|
If the link doesn't work read the thread called Hello Slipper Assembly.
|
|
#4
15-07-2012
|
||||
|
||||
|
it sounds like it will fit Phil,they are being advertised as "B4/SC10" ect ect,I asked as my clutch is very sensitive to adjustment,a slight movement of the nut and it goes from no slip to too much,so I was hoping this would help and give a more gradual adjustment-i`m going to give it a try.....On some of the forums some have commented about the extra rotating mass,but it wont be as heavy as the brass flywheel so I dont see it as a problem-only one way to find out!!!
__________________
X-Factory X-6 Cubed
|
|
#5
15-07-2012
|
|||
|
|||
|
Don't buy anything, we can try mine in the other X6 at the track on Tuesday.
Or if I have time I'll try it tomorrow. The VTS was designed for the FT 4x4.
|
|
#6
15-07-2012
|
|||
|
|||
|
It's not very heavy, the basket is plastic.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
X-Factory
Hybrid Mode
