|
|
#1
|
||||
|
||||
![]()
seen a few of these mods around to fit big bore springs on the standard small bore 44 shocks any one tried and tested it yet to offer there opinions on i its worth doing?
![]()
__________________
team durango, xray t3 12, tekin, lrp, ko propo, tamiya m03 |
#2
|
||||
|
||||
![]()
Hi, I use Kyosho big bore springs on my Tamiya 502 and I really like them.
More progressive giving a better feel on most tracks. Although at £12 a pair they're not cheap. All I have ever used is yellow fronts with red rears or red fronts with white rears. Hope this helps. Dave
__________________
Team Associated Hobbywing SRT Reedy My feedback http://www.oople.com/forums/showthread.php?t=63097 |
#3
|
|||
|
|||
![]()
yes, I use kyosho yellow front and white rear on my B44.1 and woks verry good
|
#4
|
||||
|
||||
![]()
Front - Losi Blue/Black
Rear - Losi White/Yellow Losi red piston front and blue rear. |
#5
|
||||
|
||||
![]()
I run with the AVID Springs, they work great for me.
Front: 35wt/Ghea Magic Piston 2/AVID purple Rear: 30wt/Ghea Magic Piston 1/AVID yellow The stock pistons also worked properly. |
#6
|
|||
|
|||
![]()
I run them and they make the car so easy to drive and more predictable!
Won north west regional today with the below setup. Remove 3 outer rows off front an one inner Remove 1 inner and 1 outer off rear Bed in prior to running aswell on some Tarmac ![]() http://www.petitrc.com/setup/associa...701/index.html
__________________
Gareth Hill Schumacher - Sanwa - LRP - Mb models |
![]() |
Thread Tools | |
Display Modes | |
|
|