trakpower v balance

[mobile chicane]

hi all got one of these on flebay but I need the adaptor lead for it to balance my demon 5000mah lipo with the small white 3 pin connector.

I've seen these on a rc flight sight

http://www.fast-lad.co.uk/store/flig...gn-p-3708.html

is this the right one or should I be contacting trakpower aka flight power for a specific lead ?

ta

[mark christopher]

contact trakpower for the correct part number

[JCJC]

Giles, we have something like this for our Demon Lipo, connects twix charger & battery when doing a balance charge, which our BC6 will do, has a little board that the lipo plugs into, why not have a shufty when next we meet, we can also balance charge your battery if you are happy to wait. Mick

[mark christopher]

Originally Posted by JCJC

Giles, we have something like this for our Demon Lipo, connects twix charger & battery when doing a balance charge, which our BC6 will do, has a little board that the lipo plugs into, why not have a shufty when next we meet, we can also balance charge your battery if you are happy to wait. Mick

dont think it will fit the v balncer though, i got the bc6 and all leads but im sure they are different

[JCJC]

Not suggesting it will fit Mark, I know when I was looking for the balance cable I found it hard to guess what kind of connector was actually used, I have a Trackpower balance cable and one to suit the Demon Lipo, Giles is a practical lad. I did think originaly that I could just buy the connectors and make up a lead, but unusal or what ?

[mark christopher]

Originally Posted by JCJC

Not suggesting it will fit Mark, I know when I was looking for the balance cable I found it hard to guess what kind of connector was actually used, I have a Trackpower balance cable and one to suit the Demon Lipo, Giles is a practical lad. I did think originaly that I could just buy the connectors and make up a lead, but unusal or what ?

why mess about making one when they sell one for around £3??
http://www.flightpower.co.uk/Product...p?currency=GBP

call them and ask or email a pic of the connector, easy!