|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
30-04-2008
|
||||
|
||||
New member of the family
Well I have got my X6 at last just finished building it last night looks good, first run out this weekend at Bury metro we will see how it goes. I will be running the associated shocks so what oil and springs should I run for Bury or if anybody can post a setup (Chris Dan or Carl).
|
|
#2
30-04-2008
|
||||
|
||||
|
Oh and what gearing on an LRP 6.5 non sintered cheers.
|
|
#3
30-04-2008
|
||||
|
||||
|
cant help with the associated setup im afraid but gear it on a 20/81 on a bonded6.5 possibly go up to a 21 but only if you are lacking top end. i ran most of the national season on a 20 and never struggled
__________________
Nathan Ralls HPI, Custom Blitz, www.piraterc.com mr-o foams woop woop racing officialy keeping team toe out inline 
|
|
#4
30-04-2008
|
||||
|
||||
|
Cheers Niggs.
|
|
#5
30-04-2008
|
||||
|
||||
|
Red losi pistons all round 35wt front and 30 wt rear and silver springs all round. This was a very good starting setup.
|
|
#6
30-04-2008
|
|||
|
|||
|
If your not changing to losi pistons.
Then I would run Front : 30 cwt No2 Blue spring 2 internal spacers. Rear : 35 cwt No1 Silver spring No internal spacers, but an external to stop the driveshaft hitting the diff outdrive.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
X-Factory
Hybrid Mode
