Vintage servos

[Naushad]

Doing up a few vintage rides all 4wd. What servo were good at the time. I've got some futaba 3001/3003 though Im assuming they are quite standard.

[RudolfXC]

KO FET 1001, Futaba 148

[CAT3K]

Back in about 1990 i was using Futaba S9401 servos. Back then they cost £55, a small fortune. One of the first coreless servos too if i remember correctly?

[imull]

Prior to that it was Futaba 131SH and 131S and KO 87Z FET with the external FET module.

[SlowOne]

Naushad, I've got 131 and 132 servos, and original KO with the external FET box, and some KO 1002 FET servos with the blue leads. These ran from about 1990 to 1994. If you settle on any of these and are after some, PM me. I'd like to think of them going to a good home, rather than continuing to sit in my old pit box! HTH

[Steven Forster]

Originally Posted by imull

Prior to that it was Futaba 131SH and 131S and KO 87Z FET with the external FET module.

Think i still got one of the KO 87Z FET worlds edition servos which has a little box and capacitor attached to it and also work the last time i tested it

[CrashBangWallop]

Would give a big thumbs up for the KO's mentioned especially the ones with external + supply on a flying lead with choke built in. Cant remember the model numbers but someone else probably has ( it was a long time ago ! )