is the team c tc02c any good?

[12-nitroman]

just wondering what these team c tc02c buggies are like? they look like they're built to race and i think are the same as the ansmann x2c? or have they used better plastic.

thanks

[SamRCRacing]

I run the ansmann x2c and it is a great car hadleing wise, it is forgiving and easy to drive. I am not sure about if there are any different upgraded parts on the tco2c but I'm sure other people will kno1.

Hth

Sam

[Frecklychimp]

The Team C products are very good and definitely suited to racing.

I know the TC02C comes with uprated gears in gearbox over the Ansmann car,

Was looking at Team C/SMD demo mid motor car yesterday and there were some alloy parts on it, hub carriers, rear hubs and rear bulkhead but not sure what comes in the kit as there are a couple of spec levels available.

Look really good on track, won't be the strongest car on the market but for the price they are definitely good value and a capable competitive clubmans/ Regional racers car

[12-nitroman]

yeh there are a few versions,some have alloy parts and some dont,also there are 2 chassis layout in mid motor,one which take 2 saddles like a c4.1 and one that takes a stick lipo across ways infront of the motor like a x6.

Originally Posted by Frecklychimp

The Team C products are very good and definitely suited to racing.

I know the TC02C comes with uprated gears in gearbox over the Ansmann car,

Was looking at Team C/SMD demo mid motor car yesterday and there were some alloy parts on it, hub carriers, rear hubs and rear bulkhead but not sure what comes in the kit as there are a couple of spec levels available.

Look really good on track, won't be the strongest car on the market but for the price they are definitely good value and a capable competitive clubmans/ Regional racers car

[mattybucks]

Great car, out of the box. We hold the majority of the alloy hop-ups. Spars wise the front kick up plate is the only real weakness, but at less thank a fiver it's not too bad.

Hop-up wise - the toe in blocks and the 30 degree caster blocks seem popular as do the alloy hexes.

[Karting]

If this is the tc02c



Then it isn't the same as a X2C, its the same as the Mad Monkey (chassis wise)

The X2C is a narrower chassis wise and only takes saddle packs.

[johnni boi]

The one that frecklychimp looked at was specked with a number of option parts, put on the car to show what parts are available. Jono made 5th in the B at Mid East meeting at West Bridgford yesterday in a field of 70+ drivers including F1 grade drivers.

The internal gears do not seem to be a problem on the Team C cars, club lads at Broxtowe Club have built them as kit and been running them with no problems.

[12-nitroman]

ah right,sounds good and i did notice the design is similiar to a x factory x6 as the stick lipo sits across infront of the motor.
does it break often?

Originally Posted by SamRCRacing

I run the ansmann x2c and it is a great car hadleing wise, it is forgiving and easy to drive. I am not sure about if there are any different upgraded parts on the tco2c but I'm sure other people will kno1.

Hth

Sam